
piCorePlayer - Squeezebox on a Pi
Adventures in Raspberry Pi Land
When the Raspberry Pi was announced a few years ago, I was rather attracted by this low power but very flexible educational computer but never bought one until recently, when I fancied having a bit of a play with setting up a Raspberry Pi as a Squeezebox player.
After a bit of a sidestep in the ordering, I ended up with the following:
So far, so good.
PiCorePlayer successfully saw the Wifi network. I entered the SSID and password, but the wifi stick resolutely refused to play ball after a reboot, leaving the device uncontactable except via ethernet. I subsequently investigated reviews of the Wifi stick I'd chosen. Turns out that the thing won't work with piCorePlayer, but will with Raspbian. Ho hum! I then ordered an Edimax device, which I should have done in the first place.
In use, the Pi seems to work well, and plays audio robustly, no pops, clicks or other audio artefacts. In its transparent case it looks quite attractive in a 1970s Blake's 7 budget SciFi kind of style, what with the various flickering and flashing LEDs.
A couple of days later, the replacement WiFi stick arrived. By this time, piCorePlayer version 1.12c was released. I reflashed the SD card, and repeated the setup routine. I also expanded the second partition to fill the rest of the SD card. This should allow me to install further extensions to piCore. The Edimax WiFi stick does seem to play ball with piCorePlayer, which can now take up residence next to the HiFi. I note that selecting the correct ALSA parameters for the external DAC is important to avoid pops, clicks and other audio degradation. PiCorePlayer's web interface makes setting up the audio (and Wifi) very easy and straightforward.
The Pi is hooked up to a Cambridge Audio DACmagic 100, and thence to a Naim Nait3 integrated amplifier and Mission 720 speakers. I also tested it using a Cambridge Audio DACmagic XS DAC/Headphone amp.
Next up...
I have a HiFi Berry DAC card in transit. I have also soldered up an expansion board for a 2 x 16 LCD display.
- One Raspberry Pi Model B, with SD card containing NOOB
- One USB WiFi USB stick (not the Edimax stick I originally planned - more on this later)
- One clear plastic case
- One power supply

Stay Informed
When you subscribe to the blog, we will send you an e-mail when there are new updates on the site so you wouldn't miss them.
Comments